How to Clean Snap-On Tools

How to Clean Snap-On Tools – Steps of the Whole Process

Snap-On incorporated is one of the largest manufacturers of professional tools based in the USA. Thanks to its superior usability, sophisticated materials, and specialized techniques, the company prides itself on being the best in business.

The company mainly produces high-end and professional-grade tools for the transportation industry overlaying automotive, aviation, marine, and railway engineering.

Due to their specialized and sophisticated nature, the tools are needed to be cleaned and maintained well. Without proper maintenance, the tools are susceptible to damage like rut and rust. We regularly get emails from people asking how to clean their Snap-On tools, whether it’s the handle or the tool heads themselves.

In this article, we will take a deep dive into the step-by-step cleaning process of different Snap-On tools and their adjoining box.

Basics of How to Clean Snap-On Tools

Before we dive into the cleaning of different Snap-On tools, there are some basic things to go over first. We have already mentioned how an unclean tool may cause it to rut or rust over time. Even if you have the top quality tools you definitely need to clean them.

When it comes to cleaning, certain aspects should be kept in mind. Different types of Snap-On tools can be generalized into three parts:

  • The handle
  • The Joint
  • The Tool body

Cleaning a tool means cleaning these three parts. It can be either separately or together. But is cleaning tools limited to the tools themselves? Not at all.

While you are cleaning the tools, it is essential to clean where the tools are stored. That is the toolbox. In the subsequent part, we will discuss in detail the steps of cleaning the Snap-On tools and the toolbox that comes with them.

Steps of Cleaning Snap-On tools

To get started with the cleaning, you will need a few items. These are essentials to get a perfect shining after cleaning on your tools.

Things You Will Need

  • A microfiber towel
  • A pre-clean solution
  • A degreaser solution
  • Clean, dry wipes

Step 1 – Rub the Pre-Clean Solution

how to clean snap on tools

The most common way to get the Snap-On tools dirty is by grease. These are oily, gritty, and hard to get off without the proper process. And if you let them be unclean for a long time, they become sticky, which essentially makes the tools unusable.

To get started on cleaning the grease, take a pre-clean solution and spray it all over the tool. Make sure that all the grease gets covered by it.

Step 2 – Gently Rub with the Dry Wipes

The next step is to wipe off the pre-clean solution using a dry wipe gently. This will essentially prime up the grease to be cleaned using a degreaser solution.

Step 3 – Clean Using the Microfiber Cloth

Clean Snap on Tools

The last step is to generously spray the degreaser on the microfiber cloth. After that, use it to wipe the tool properly. Don’t just do normal wipes. Be hard and do it strongly. Make sure the microfiber cloth reaches every single corner and joint of the tool.

After you’re done, the tools should be looking just like new.

Steps of Cleaning the Toolbox

Since all the clean tools will be stored in the toolbox, it is important to have a clean toolbox. To that end, you will need a few things first.

Things You Will Need

  • Dry towel and microfiber cloth
  • A pre-clean solution
  • A degreaser solution
  • A hand-held polisher with the polishing agent

Step 1 – Apply the Pre-Clean Solution

apply pre cleaning solution to clean snap on toolbox

The first step is to apply the pre-clean solution. This will essentially prime up the toolbox surface for the polishing.

Step 2 – Use the Polisher

use polisher to clean snap on toolbox

There might be minor scratches and patches on the surface of the toolbox. And if the box is glossy, they tend to become an eyesore.

So, it is better to get the polishing going as well. Simply apply some snap-On proprietary polishing agent on any standard polisher and do a gentle polishing. A few coatings of polishing will see the surface become brand new.

Step 3 – Rub with the Degreaser

Degreaser to clean snap on toolbox

The last step can be skipped if your toolbox isn’t greased in any way. But if it is, we suggest using a degreaser on a microfiber cloth and doing a hard rub down of the toolbox.

This will get any grease out of the surface or the inside of the box and have it sparkling like new.

Tips of Cleaning Snap-On Tools

Here are some of the things to keep in mind while cleaning the Snap-On Tools.

Use Single Use Towel and Microfiber Cloths

Since you’re going to be cleaning grease, the best way to approach it would be to use single-use wipes and clothes. It might be easy to get the grease off of tools, but it’s not the same with clothes.

And the last thing you want is to make your tools dirtier instead of cleaning them.

Make Sure All the Joints Are Open

Snap-On tools are intricate, and some have different joints and hinges. Make sure that all of these joints and hinges are open while cleaning. This will help to ensure that there isn’t any dirt or grease remaining.

Use Branded Products

This is a precautionary measure straight out of the book. Whether it’s the Pre-Clean, Degreaser, or polisher, always make sure to use branded products. Snap-On has almost all of these in its product range. Check them out if you can.

Final Words

To wrap things up, Snap-On tools are some of the best you can find in the market. And the best will stay as best only if you take good care of it.

This article mainly focused on different steps and processes of cleaning Snap-On tools and the adjoining toolbox. We hope now you won’t have any problem keeping those tools cleaned.

Leave a Reply

Your email address will not be published. Required fields are marked *